Painting Coating and Drying Oven,UV Painting Line,Coating
Suitable for fiber cement board, dinning table, cabinet plate with
shade horn, thick plate or workpiece has demand on high quality
General technical parameters for painting production line
Maximum processing length
Working spray gun
Maximum processing width
Maximum processing thickness
Minimum processing length
Minimum processing width
PU, UV(Water paint)
1. This production line is composed of feeding machine,dust remove
machine,five-axis automatic painting machine,leveling machine,UV
drying machine and conveyor.
2. Dust extraction during loading transport and paint drying
equipment are provided to shorten the paint drying period and
3. It’s principle in the production as below:
All kinds of work-piece with different size will be conveyed
through the dust machine by stainless steel roller to clean the
dust, and then scanned the work-piece’s size, through the
calculation of numerical control system to get the spraying
trajectory to start painting.
4.Adopts a set of spraying systems with five-axis, and is driven by
independent servo control system, to achieve high-speed and steady
reciprocating spray, to ensure the spray efficiency and
high-quality results, achieving effectively the continuous spraying
of the production line.
5. The screen scanning system is provide in the loading enter of
spray painting room in order to scan the work-piece’s shape and
size. Then the CPU controller can receive the work-piece’s signal
and start spray painting to save paint.