Non-Asbestos Calcium Silicate Board Customized Size and Color
Suspended ceiling, partition, heat insulating board, base plate,
external wall panel, exterior wall cladding
Calcium Silicate Board is mainly made of cement and silicate
materials as base and wood fiber strengthen, forming in one time
with high pressure (4000 ton) and fumigation(autoclave),Which has
the advantages of high strength, anti- freeze, water-resist,
fire-proof, damp-proof, sound-absorption , no distortion and no
radiation...etc. Used as suspended ceiling, partition, heat
insulating board, base plate, external wall panel, exterior wall
For example: Business building, Entertainment facility,
supermarket, hotel & restaurant, factory, warehouse, apartment
building, hospital, theater and station etc.
|The size||1220x2440x5mm-30mm (4'x8'x5mm-30mm)|
|Materials||Tobermorite, Cao, Quartz sand, reinforced wood fiber|
|Fire-proof rate||Incombustibility: 180 minutes (GB/T9978-1999)|
|Heat conduction||0.24W/MK (Jc/t564) Average|
|Anti-bend strength||>15MPa (GB/T7019-1997)|
|Moisture movement rate||<0.19% (GB/T7019-1997)|
|Dry shrinking rate||<0.09% (GB/T7019-1997)|
|Radiation rate||According with Standard (GB6566-2000)|
(1) Incombustibility/Non-flammability: Consmos Calcium silicate
board is non-flammable and conforms to the national grade A
standard (GB8624 Grade A) with excellent fire resistance property.
In case of fire, the board will not burn and not give off toxic
(2) Thermal/heat insulation: Owing to low heat conductivity, the
product has good performances on keeping warm and heat insulation.
(3) Water-proofing and moistureproof: The product is allowed to
long-term exposure to moist environment but still very stable. The
board still keeps intact after being soaked in water for one month,
the phenomenon of swelling and out of shape will not happen. It has
good adjusting mechanics like woods. Even it is used on wash house.
(4) Endurance/durability: Consmos Calcium silicate board provides
good insulation against bugs, fungus and corrosion. It can last for
a long time and will not corrode.
(5) Noise-proofing: Consmos Calcium silicate board provides good
insulation against noise.
(6) High-Strength and Light weight: The board is light weight, in
this case, it can decrease weight of building greatly. At the same
time, the material is high-stength and not easy to be damaged.
(7) Easiness to installation: The construction process does not
require complicated tools but just the ones used in regular wood
construction. Our board can be fixed on light steel frame with
self-attachable screws or a glue gun to nail the bolts into the
(8) Environmental protection: Consmos Calcium silicate board is
100% free of asbestos fiber and will not cause any harm to human
body or the environment.
(1) According to the design drawings and the actual construction
situation, the board cutting and opening, if necessary on-site for
chamfering, fiber reinforced calcium silicate board plate
chamfering processing of two long sides are ready, but when the
wall is higher than 2440 mm, short fiber reinforced calcium
silicate board plate horizontal seam chamfering edge must the spot,
in order to better deal with seams.
(2) In the fiber reinforced calcium silicate board floor spring
line and mark from the tapping screw fixed point, at the same time
slip concave hole (diameter larger than the self tapping screw
head, 1 mm ~ 2 mm hole depth 1 mm ~ 2 mm). Self-tapping screw from the
board edge to 15 mm, 50 mm away from voids, self tapping screw
spacing is 200 mm ~ 250 mm.
(3) When the partition wall is planking, it’s generally adopts the
vertical laying, namely the long sides of the plate is fixed on the
vertical keel; Plate butt to close to nature, cannot crush in
place; The seams of the walls on both sides should be staggered,
can't fall on the same root keel.
(4) Fixed fiber reinforced calcium silicate board, board and keel
should be drilled, the aperture is smaller than self tapping screw
diameter 1 mm, fiber reinforced calcium silicate board plate with self
tapping screw fixation, fixation should be in the middle of the
board to the periphery fixed, all screw head should sink to the
board face 1 mm.
(5) installing doors and Windows around the plate, the plate seam
can not fall in the horizontal and vertical with the ground box on
the keel, to avoid any Windows and doors often switch plate seam
cracking caused by vibration.
·Use shoot nails or rivet screws to fix the joint frame in follow
and top slab.
·Arrange vertical keel according to the design requirement
(generally 612mm),and then install the horizontal keel.
·Cut the board into the right size.
·Fix the board on the keel with self-drilling screw by the way of
offset joints. The space between two tapping screws is generally
about 200-250mm, and the screw need to sink into the board for
·Please keep 4mm expansion joint between two boards
·It should be fixed from center to around while sealing the board,
do not multiple-point work at the same time so as to avoid making
the board deformed.
·Before the board packed, in order to strengthen the effect on
sound insulation and fire-proofing, you can put some glass wool or
rock wool when its necessary.
·Choosing the suitable installation method and to determine the
hoisting position according to your design requirement.
·Set embedded parts or decorate phi 10 expansion bolt according to
your design requirement, space requirement within 1mm,fix iron
casting, welded the phi 8 steel rebar and determine the length,
generally 10-15mm larger than actual use.
·Lift the key keel on the hock, fix the edge keel on the side-wall
according to the ceiling height, divide the middle keel and sub
keel according to their specifications.
·Place calcium silicate board on it, when installed, the direction
of arrow should be the same with the white line direction on the
back of calcium silicate board, so as to keep the integrity of the
pattern and design, if you use shelve method to install the board,
you should leave some installation seam.
Storage and Transport
|·Do not collide and throw the board when loading and moving, the
transportation underside must be flat, and the product must be
fixed well, the transport process need to reduce vibration and
·Handling the board, it should be carried on both sides of the
board with double hands uprightly instead of horizontally while
handing the board.
·Stacking area should be flat and firm; stack height shall not
exceed 1.5meter and need special wood brackets at the bottom, some
scattered board cannot against the wall uprightly.
·The goods should be prevented from rain and humidity during
transportation and storage.
·Calcium silicate board has good workability, it can be constructed
discretionarily according to the project requirement such as
cutting, drilling, screwing and so on. v