Maxium 3000mm Length fiber cement colored board Customized Size and
The boards can be used as home decoration, such as bath room,
living room, internal wall and so on. It is eco friendly and easy
The Color is also customized, you can chose your color by your
No special tools are required. The products can be used with normal
nails, fastened by normal or self-drilling screws and cut by an
electric power saw with a diamond blade.
Sinoma Board can be fixed to both timber (minimum size 1.5 x 3
inches) or steel frames (at least 0.55 mm thickness). The board
must be supported at the edge at intermediate positions with
centers not exceeding 600 mm. Screws must be located more than 12
mm from edges and 50 mm from board corners.
Fasteners can be both nails and screws. It can be nailed directly
to timber supports with round wire nails. For metal screws, the
size and length of the screw depends on the thickness of the board
and the gauge of framing.
Since fiber-cement board is subject to slight dimensional changes,
a butt joint can be used in dry partitioning areas or where an
exposed joint appearance is acceptable. For better water
protection, either flexible acrylic or polyurethane based sealant
can be used to seal gaps of 3-5mm.